Up
|
Front and side mounted push pads requiring less than 5 pounds of force to activate that initiate water flow through a flexible hooded rubber bubbler having a non-squirt feature. An internally mounted valve and adjustable stream regulator shall control water flow between 20 and 90 psig. Evaporator shall be high efficiency tank type and shall be encapsulated in insulation. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have integral drain strainer. Heavy-duty galvanized frame shall support powder-coated galvanized exterior panels (standard finish) or stainless steel panels (optional finish). delivers 8.0 gallons of chilled drinking water per hour. For General Product Information contact Haws directly, Toll-free: 1-888-640-4297 -For information on installation, repair or maintenance contact Haws Technical Support TOLL-FREE: Phone: 1-800-766-5612 or email Haws: techsupport@hawsco.com (do not ask them about this ad, they are NOT the seller) * Cooling Capacity: 8.0 GPH (30.3 LPH) * Glass Filler Accessory Option * Built-in 100 micron strainer stops particles before they enter the waterway * Waterways are lead-free in materials and construction * Heavy duty galvanized steel frame * High efficiency cooling tank and coil * Three push pad activation * External stream height adjustment * Prior to roughing consult with local, state and federal codes for proper mounting height * Removable lower panel provides easy access for installation * Standard Cabinet Finish: Granite powder-coated paint on galvanized steel Capacities are at industry standard rating conditions of 50°F (10°C) outlet water, 80°F (26.7°C) inlet water and 90°F (32.2°C) ambient air. Model covered by this specification complies with all known Plumbing Codes. Listed by Underwriters Laboratories Inc. Components in this cooler are lead-free as defined by the Safe Drinking Act Amendments of 1986, and the Lead Contamination Control Act of 1988. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. Drinking water cooler shall comply witn ANSI A117.1 and ADA frontal approach and protruding object requirements. Drinking water cooler is Certified to NSF/ANSI 61. WARRANTY Continental United Sates and Canada only, one (1) year MANUFACTURER’S warranty from date of Installation for repair or replacement on parts only. HAWS will warrant for a further four (4) years the complete hermetically sealed refrigeration system. See warranty for specifics. Please read! If you did not receive what you were expecting and are considering leaving negative feedback please contact us first. |