Up
|
GE ConstantColor® PulseArc® CMH® Ceramic Metal Halide PAR30L High Intensity Discharge - Ceramic Metal Halide Ballast thermal protection, UV control Nominal Initial Lumens per Watt Center Beam Candlepower (CBCP) Open Circuit Voltage (peak lead ballast) (MIN) Open Circuit Voltage (RMS lag ballast) (MIN) No Of Items Per Standard Package R- WARNING: This lamp can cause serious skin burn and eye inflammation from shortwave ultraviolet radiation if outer envelope of the lamp is broken or punctured, and the arc tube continues to operate. Do not use where people will remain for more than a few minutes unless adequate shielding or other safety precautions are used. Certain types of lamps that will automatically extinguish when the outer envelope is broken or punctured are commercially available. Visit the FDA website for more information: http://www.fda.gov/cdrh/radhlth/urburns.html 22159 GE ConstantColor® PulseArc® CMH® Ceramic Metal Halide PAR30L * Do not turn on lamp until fully installed. * Do not use where directly exposed to water or outdoors without an enclosed fixture. * Turn power off before inspection, installation or removal. * Keep combustible materials away from lamp. * Use fused or thermally protected ballast - see instructions. * Use in fixture rated for this product. * Unexpected lamp rupture may cause injury, fire, or property damage * Do not exceed rated voltage. * Do not store flammable materials near/below lamp. * Do not turn on lamp until fully installed. * Do not use beyond rated life. * Do not use lamp if outer glass is scratched or broken. * Do not use where directly exposed to water or outdoors without an enclosed fixture. * Use only properly rated ballast. See list of cautions & warnings. * Rated life based on 11 hours per start * Use electronic ballast, peak lead ballast, or system which can shut itself off if ballast overheating occurs |