Up
|
ITEM: GARDCO Emco DECOLUME Outdoor (Suitable for Wet Locations) Tall Arm Mount Luminaire, 18" x 18" x 12" high, Custom Order Model W4-181QVHP-1000PSMH-480-BLP-LP, Equivalent to Model DECTA18-1-QV-1000PSMH-480-BLP, with Glass Sag Lens, Includes Arm Mount AND 1000W Pulse Start Metal Halide Lamp (a $60 value!!!), all components NEW in factory box. Date of manufacture: June 2002. - Custom Order Model W4-181QVHP-1000PSMH-480-BLP-LP. NOTE: These fixtures were leftover from a parking lot lighting project for a ***-Mart store in Northern NJ. - Equivalent to current model DECTA18-1-QV-1000PSMH-480-BLP. - (QV) IES Type V Distribution, Vertical Lamp, supplied with sag lens standard. - (1000PSMH) 1000 Watt Pulse Start Metal Halide - (480V) Luminaire voltage is 480 volts. - (BLP) Black Paint - Each luminaire recieves a fade and abrasion resistant, electrostatically applied, thermally cured triglycidal isocyanurate (TGIC) polyester powdercoat finish. The finish color is Black. - (LP) 1000W Pulse Start Metal Halide Lamp Included (these cost about $60+ each) What the manufacturer says about the CURRENT DECOLUME product: "GENERAL DESCRIPTION: Each EMCO Decolume is a sharp cutoff luminaire for high intensity discharge lamps. Internal components are totally enclosed, raintight, dusttight, and corrosion resistant. No venting of the optical system or electrical components is required or permitted. Lamping requires no lifting or hinging of the luminaire housing, disturbing wiring or exposing uninsulated live parts. HOUSING: The housing wrapper is one-piece dieformed aluminum with three (3) integral ribs permanently rolled into the housing. The housing has an integral reinforcing spline and no welded corners. Silicone seals provide a weathertight seal at all points of material transition. ELECTRICAL: Each high power factor ballast is the separate component type capable of providing reliable lamp starting to 20°F. Entire ballast assembly is secured within the luminaire, above the reflector system. Metal Halide ballasts are medium regulation autotransformer providing +10% power regulation with +10% variation from rated input voltage. Component-to-component wiring within the luminaire will carry no more than 80% of rated current and is listed by UL for use at 600 VAC at 150° or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. FINISH: Each luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) powdercoat finish. Optional finishes may vary." MODEL NUMBER: W4-181QVHP-1000PSMH-480-BLP-LP (Equivalent to current model DECTA18-1-QV-1000PSMH-480-BLP) Gardco's Decolume Tall Arm Mount Luminaire webpage SOURCE: Direct from the warehouse of a large electrical contractor that ceased operations. NOTE: These fixtures were leftover from a parking lot lighting project for a ***-Mart store in Northern NJ. SELLS ELSEWHERE FOR APPROX.: $400+ with Lamp Included Thank you for considering our products! |
